Roller shutters are one of the best ways to keep a home warm in winter. Close them on a cold night and they add a layer between your windows and the weather, cutting draughts and holding the warmth inside. They also protect the glass during winter storms.
The good news is that shutters need very little upkeep to keep working at their best. Around Mandurah, though, salt air, sand and winter rain all take a toll on the moving parts. These five habits will help your shutters run smoothly through the cooler months and beyond:
- Keep the shutters free of rubbish and debris
- Wash them gently
- Use the shutters with care
- Lubricate the guide rails
- Avoid harsh or abrasive cleaners
Keep the shutters free of rubbish and debris
Leaves, twigs, sand and dirt are the biggest enemies of a roller shutter. When they build up in the guide rails or along the bottom slat, they stop the curtain running smoothly and can scratch the finish or trap moisture against the aluminium.
Every few weeks, grab a soft broom and sweep the guide rails and window sills. Check for leaves or twigs that have found their way into the channels, especially after a windy night. With the shutter slightly open, brush out the small ventilation holes between the slats so air and light can still pass through.
Wash them gently
A proper wash every couple of months keeps salt and grime from building up, which matters a lot for homes near the coast or the estuary.
- Hose the shutter down gently to loosen surface dirt. Do not use a high pressure cleaner, as it can force water and grit into the mechanism.
- Wash the slats with a soft sponge and warm water with a little mild soap.
- Rinse with clean water.
- Dry with an absorbent cloth. Old towels work well.
- Let the shutter dry completely before rolling it all the way up, so moisture is not trapped in the roller box.
Winter is also when you might spot mould or mildew on shaded walls and shutters. The same mild soap and water will usually lift it. Dry the slats well afterwards and leave the shutter part open on a sunny day to air out.
Use the shutters with care
When a cold change blows in, it is tempting to drop the shutters in a hurry. Take your time instead. Open and close them smoothly, make sure the shutter does not slam into the box when it opens, and close it fully before you lock it to avoid accidental damage.
If you have manual winders or straps, wind them steadily rather than forcing them. For motorised shutters on a wall switch or remote, wait for the shutter to finish moving before changing direction.
Lubricate the guide rails
Over time the rolling action can start to feel rough or noisy. Follow the care instructions for your particular shutter before applying any lubricant. If the instructions do not specify a product and application method, ask the installer before treating the guides or mechanism.
The internal parts such as the axle, bearings and springs or motor are best left to a professional. If the shutter grinds, sticks, runs unevenly or a slat has come loose, stop using it and get it checked before a small issue becomes a bigger repair.
Avoid harsh or abrasive cleaners
Your shutters have a powder coated aluminium finish that is tough but not indestructible. Scourers, steel wool, solvents and strong chemical cleaners can scratch or dull the coating and leave the metal open to corrosion. Stick to soft cloths, sponges and mild soapy water.
When to call in a professional
Regular home care goes a long way, but an annual professional clean and service keeps shutters at their best, particularly in coastal suburbs where salt and sand build up quickly. Our roller shutter cleaning service covers a thorough clean and a check of how the shutter is running.
If your shutters are old, damaged or no longer worth repairing, or you are thinking about adding shutters to more windows, take a look at our custom made roller shutters. They are built from marine grade, powder coated aluminium in a range of colours, with manual, wall switch and remote control options.
A quick winter checklist
- Sweep the guide rails and sills every few weeks
- Wash with mild soap and water every couple of months
- Dry before rolling the shutter up
- Open and close smoothly, never forcing it
- Check the manufacturer’s lubrication instructions before applying any product
- Book a professional clean and service once a year
Need a hand with your shutters this winter? Contact Betta Shade for a free quote on cleaning or new roller shutters, or call (08) 9582 0083.



