Grey roof to fence blind spanning a paved side passage between a brick home and a Colorbond fence

Roof to Fence Blinds and Shade

Custom roof to fence blinds that close the gap between your roofline and fence, measured, made and installed by our owner-operator across Mandurah, Peel and Bunbury.

  • Shades side passages and courtyards
  • Custom made to your gap
  • Owner measures and installs
  • Free measure and quote

Call (08) 9582 0083Showroom in Stake Hill, by appointment

Get a free measure & quote

Tell us what you need and Daniel will be in touch.

Prefer to talk? Call (08) 9582 0083

What roof to fence blinds do

A roof to fence blind is a fabric shade that runs from the edge of your roof, gutter or patio across to the top of your boundary fence. It turns a hot, exposed side passage or a narrow courtyard into a covered space you can actually use. Some people search for it as roof to fence shade, gutter to fence shade, house to fence shade or a fence awning. They all describe the same job: closing the gap between the house and the fence.

At Betta Shade we custom make roof to fence blinds for those awkward strips of yard that standard blinds and patios do not fit. Every one is measured on site and built to suit the exact span, angle and fixing points of your home.

Who roof to fence shade suits

Roof to fence blinds work best where the gap between your house and fence is too narrow for a patio but too exposed to leave open. Common spots we shade around Mandurah include:

  • Side passages and walkways where bins, hot water units and air conditioners sit in full sun.
  • Narrow courtyards on smaller new-estate lots, where a neighbour’s two-storey home looks straight down into your yard.
  • The strip beside an existing patio, extending shade from the patio roof out to the fence (often searched as patio to fence blinds).
  • Laundry and drying areas that need cover from sun and glare.
  • West-facing walls where afternoon sun heats the rooms inside.

If your gap is a full outdoor living area rather than a passage, our patio and cafe blinds or awnings may be a better fit. We will tell you honestly which option suits the space when we measure.

For a wider look at shading patios, windows and side passages, read our guide to protecting your outdoor space with outdoor blinds.

How much do roof to fence blinds cost?

This is one of the most common questions we get, and the honest answer is that it depends on your space. We do not publish a single price because two side passages that look similar can need quite different blinds. These are the things that change the price:

  • Size of the span. The length of the run along the house and the distance from roofline to fence.
  • Height and angle. How far the fence sits below the roof, which affects the fabric shape and the fittings needed.
  • Fixing points. Whether we are fixing to a brick wall, fascia, gutter line, patio beam, timber fence or Colorbond fence, and whether extra support is needed.
  • Fabric and colour. The level of shade, privacy and outlook you want from the material.
  • Number of sections. Long runs or runs that change direction may be made in more than one piece.
  • Site access. Tight spaces, two-storey rooflines and obstacles such as air conditioners or meters.

The quickest way to a real number is a free measure and quote. Daniel comes out, measures the gap, checks what everything will fix to and gives you a written price with no pressure to sign on the day.

DIY roof to fence kit or custom made and installed?

Plenty of people look at a DIY roof to fence blinds kit first, and for some homes that is a reasonable choice. Here is how the two options compare so you can decide.

When a DIY kit can work

A kit may suit you if your gap happens to match one of the kit sizes, your roofline and fence are solid and easy to fix to, the site is sheltered from strong wind, and you are comfortable working at height with the right tools.

When custom made makes more sense

Kits come in set sizes, and most real side passages do not. A custom roof to fence blind is cut to your exact measurements, so there is no excess fabric to bunch up or gaps at the ends. It also helps to know:

  • Wind matters on the coast. Mandurah, the Peel and Bunbury get strong afternoon sea breezes and winter storms. The fabric, tension and fixings all need to suit that exposure.
  • Fixing points are the hard part. Gutters and older fences are not always strong enough to take the load. Daniel checks each fixing before quoting.
  • Materials last longer. We use high tensile, PVC coated woven fabrics with welded seams instead of stitched ones, plus anti-corrosion, marine-grade aluminium hardware.
  • You deal with one person. The same owner-operator who measures your gap makes and installs the blind, so nothing gets lost between a salesperson and an installer.

If you have already bought a kit and it does not fit, call us anyway. We are happy to look at the space and give you options.

Fabric choices for roof to fence shade

The fabric decides how the space feels. A denser fabric gives more shade and privacy, while a more open weave keeps light and airflow. Lighter colours keep the passage brighter; darker colours cut glare and tend to look neat against charcoal fences and rooflines. We carry fabric ranges from trusted suppliers including Visiontex, and you can see and feel samples during the measure or at our Stake Hill showroom by appointment. Read more on our outdoor blind fabrics page.

Our measure, make and install process

  1. Call or send an enquiry. Tell us your suburb and roughly what you want to shade. Photos help.
  2. Free measure and quote. Daniel visits, measures the span, checks fixing points and talks through fabric and colour.
  3. Made to measure. Your roof to fence blind is made to the exact sizes taken on site.
  4. Installed by the owner. Daniel installs it himself, so the person who measured the gap is the person who fits the blind.

Caring for your roof to fence blind

Roof to fence shade needs very little maintenance. Hose off dust, leaves and salt spray from time to time, and use a soft brush with mild soapy water for marks. Avoid harsh or abrasive cleaners. Keep gutters clear so leaves do not pile up on the fabric, and check fixing points after big winter storms. Our materials are mould resistant, which helps in shady, damp passages.

We install across Mandurah, Peel and Bunbury

Betta Shade is a family-owned business based in Stake Hill with more than 25 years in the trade and over 5000 customers. We install roof to fence blinds across Mandurah, the Peel region and Bunbury, from Halls Head and Falcon to Pinjarra, Australind and Eaton. See every suburb we cover on our service areas page, or call (08) 9582 0083 to book your free measure and quote.

What our customers say

Read more reviews
  • Very happy with our outdoor blinds on our three windows. […] Prompt, professional and quality product - A+

    Skye

    5-star Google review excerptRead on Google

  • The time from measure, quote to install was very quick. This product was quality, and most reasonably priced.

    Kathryn Pawlow

    5-star Google review excerptRead on Google

  • Very professional service. Blinds were installed efficiently and all mess was cleaned up. They look amazing! Would highly recommend Daniel.

    Karen Bormolini

    5-star Google review excerptRead on Google

Roof to Fence Blinds: common questions

How much do roof to fence blinds cost?

The price depends on the length and width of the gap, the height difference between your roofline and fence, the fabric and colour you choose, what we can fix to at each end and how easy the site is to work on. Because every gap is different we do not publish a set price. Betta Shade will measure your space and give you a free, no-obligation quote.

Should I buy a DIY roof to fence kit or have one custom made and installed?

A DIY kit can suit a simple, standard-sized gap if you are confident fixing into your roofline and fence. A custom blind is made to your exact measurements, uses fabric and fittings chosen for coastal conditions and is installed by the owner, Daniel, who checks the fixing points and wind exposure first. Many people call us after finding their gap does not match a kit size.

What is the difference between roof to fence shade cloth and a roof to fence blind?

Many kits use standard shade cloth. Betta Shade roof to fence blinds are made from high tensile, PVC coated woven fabrics with welded seams, chosen to resist tearing and stretching in the wind and sun around Mandurah.

Can a roof to fence blind attach to my gutter or Colorbond fence?

It depends on the condition and construction of your roofline, gutter, fascia and fence. Daniel checks each fixing point when he measures and will explain what the blind can safely attach to before you go ahead.

Do roof to fence blinds give privacy from neighbours?

Yes. As well as shading the gap, the fabric blocks the view down into your side passage or courtyard from neighbouring two-storey homes. Fabric choice changes how much light and outlook you keep, so we bring samples to compare.

Where do you install roof to fence blinds?

We install across Mandurah, the Peel region and Bunbury, including Greenfields, Halls Head, Falcon, Dudley Park, Coodanup, Silver Sands, Meadow Springs, Pinjarra and Australind. If you are outside these areas, call (08) 9582 0083 to check.

Will a roof to fence blind help keep my house cooler?

Shading the walls and windows along a side passage stops some direct sun reaching them, which can help keep those rooms cooler and may reduce how hard your air conditioner works on hot days.

Often installed together

All products
  • Mesh patio blinds lowered around a furnished alfresco area at sunset, with wicker lounge chairs and a woven pendant light

    Outdoor Blinds

    Patio, cafe and alfresco blinds, made to measure

  • Charcoal fabric awning on a white aluminium frame extending out from a home's roofline

    Awnings

    Fixed and retractable awnings for windows and patios

  • Folded outdoor blind fabric samples in navy, teal, charcoal, sand and cream

    Fabrics

    Mesh, canvas and clear PVC options

Areas we serve

We measure, make and install across Mandurah, the Peel region and Bunbury, working from our showroom in Stake Hill.

Book your free measure and quote

Tell us about your space and Daniel will be in touch to arrange a time. You deal with the owner from the first visit to the final fitting.